Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
1. DISPLAY AND OPERATION
89
2. Press the [SYSTEM] soft key again. The system configuration screen
appears. While this screen is displayed, the [SYSTEM] soft key is left
displayed in reverse video.
POWER MATE CNC MANAGER
SYSTEM CONFIGURATION
1.GROUP0 / β
SYSTEM <SERIES/VERSION> 88A1 01
[ PARAM ][ DGNOS ][ ][ SYSTEM ][ ]
Sample screen: Series and edition of the servo unit β series system list
The parameters necessary for the functions of the slave must be specified
in advance.
1. Press the [SYSTEM] function selection soft key. The following soft
keys appear.
[ PARAM ][ DGNOS ][ ][SYSTEM][ ]
2. Press the [PARAM] soft key. The parameter screen appears.
POWER MATE CNC MANAGER
PARAMETER
1.GROUP0 / β
0000 00001000 0010 11110000
0001 00010101 0011 01010000
0002 11111011 0012 00000000
0003 00000000 0013 00000000
0004 00000000 0014 10110001
0005 10100001 0015 00000000
0006 00000000 0016 00000000
0007 10000000 0017 10000010
0008 00000000 0018 00000000
0009 00000000 0019 00000000
[ PARAM ][ DGNOS ][ ][ SYSTEM ][ ]
The screen displays just the bit and decimal data. For details of the
parameters, refer to the parameter manual of the corresponding slave.
D Parameter screen

Leave a Reply

Your email address will not be published. Required fields are marked *