Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
1. DISPLAY AND OPERATION
91
The screen shows the current position on the workpiece coordinate
system or machine coordinate system.
1. Press the [POS] function selection soft key. The following soft keys
appear:
[ WORK ][ ][MACHIN][ ][ (OPRT) ]
2. To see the absolute coordinate screen, press the [WORK] soft key. To
see the machine coordinate screen, press the [MACHIN] soft key.
POWER MATE CNC MANAGER
ACTUAL POSITION (MACHINE)
1.GROUP0 / β
[ WORK ][ ][ MACHIN ][ ][ ]
1 1267900
F 3500
1: Coordinate F: Actual speed
If an alarm is issued during operation, the group number of the slave
causing the alarm is indicated at the right end of the message field on the
screen. Check the details on the alarm screen. For example, (13) means
that the first and third slaves are in the alarm state.
1. Press the [MSG] function selection soft key. Just the error code is
displayed on the screen.
POWER MATE CNC MANAGER
ALARM
1.GROUP0 / β
442 210 232
[ POS ][ ][ ][SYSTEM ][ MSG ]
Up to forty codes can be displayed on the screen.
For details of the alarm, refer to the maintenance manual of the
corresponding slave.
D Current position display
D Alarm screen

Leave a Reply

Your email address will not be published. Required fields are marked *