Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
1. DISPLAY AND OPERATION
95
The data file of parameters saved in memory or a memory card as a
program is written into the slave determined by the program number. The
program number and memory device are determined as described in
Saving parameters.
1. Select the active slave.
2. Press the [(OPRT)] soft key. The following soft keys appear:
[ NO.SRC ][ ][ ][ ][ INPUT ]
3. Press the nextmenu key. The following soft keys appear:
[ ][ READ ][ PUNCH ][ ][ ]
4. Press the [PUNCH] soft key. The following soft keys appear:
[ ][ ][ ][CANCEL ][ EXEC ]
5. Press the [EXEC] soft key.
During output, INPUT blinks in the message field.
The screen cannot be changed to another screen during parameter
input/output.
When the RESET key is pressed, or when an alarm status is detected in
communication, the input/output stops.
D Writing parameters

Leave a Reply

Your email address will not be published. Required fields are marked *