Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
1. DISPLAY AND OPERATION
101
[NC system] menu screen
PERIODICAL MAINTENANCE O0001 N12345
(NC)
ITEM NAME
01 BATTERY FOR CONTROLLER
02 BATTERY FOR PULSECODER
03 FAN MOTOR
04 LCD BACK LIGHT
05
06
07
08
09
10
>_
EDIT *** ***** *** **** 19:27:05
[ ][ STATUS ][ MACHIN ][ NC ][ (OPRT) ]
[ SELECT ][ ][ ][ ][ ]
[ ][ ][ ][ CAN ][ EXEC ]
NOTE
On the NC system screen, no item name can be registered,
erased, input, or output.
(2)MDI keypadbased setting
An item name can be registered on the status screen by first entering
it in the following format using keys, then pressing soft key
[INPUT] (or the
INPUT
key).
Pressing soft key [+INPUT] adds the item name to the list of
previously registered item names.
Alphanumeric characters*twobyte characters*alphanumeric characters
The twobyte characters shall comply with the FANUC code. (See
Section 1.16.6.)
When entering a twobyte character using keys, sandwich it with
an * pair.
The item name can consist of up to 24 alphanumeric characters (if
no twobyte character is included) or 12 twobyte characters (if no
alphanumeric character is included).
Example) To register LCD backlight, enter:
>LCD*110E10F410CC114010B610FE_
Format

Leave a Reply

Your email address will not be published. Required fields are marked *