Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
1. DISPLAY AND OPERATION
105
NOTE
1 An attempt to set up the count type for a nonregistered
item or an item for which the service life has not been set up
results in the warning message EDIT REJECTED.
2 Soft keys [INPUT] and [+INPUT] are ignored.
3 In leap years, an error of 24 hours occurs in the alltime
count.
4 Pressing soft key [CLEAR] results in the warning message
EDIT REJECTED.
Pressing soft key [PUNCH] enables registered data to be output to an
external unit.
Pressing soft key [READ] enables data to be input from an external unit.
These operations can be done on the status, setting, and machine system
menu screens.
EDIT *** ***** *** **** 19:27:05
[ ][ READ ][ PUNCH ][ ][ ]
[ ][ ][ ][ CAN ][ EXEC ]
After the EDIT mode is selected, pressing soft key [PUNCH] outputs the
registered data in the following format.
- Format for output from the status and setting screens
G10 L60 P01 Aa Rr [n] Qq ;
G10 L60 P02 Aa Rr [n] Qq ;
G10 L60 P03 Aa Rr [n] Qq ;
:
- Format for output from the machine system menu
G10 L61 P01 [n] ;
G10 L61 P02 [n] ;
G10 L61 P03 [n] ;
:
1.16.5
Registered Data
Input/Output
D Data output
Format
Format

Leave a Reply

Your email address will not be published. Required fields are marked *