Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
2. HARDWARE
121
The Power Mate i is equipped with a fan unit. It is easy to dismount and
mount.
There are two fans on the fan unit. Their cables are connected to the fan
connection printedcircuit board.
Each fan cable connector on the fan connection printedcircuit board is
attached directly to the control unit main body.
The basic unit A02B0259B501 contains one fan unit.
Name Unit specification
Printedcircuit board
specification
Fan unit A02B0259C020 A20B90020240
Connector for connecting
fan 1, CA39A
Connector for connecting
fan 2, CA39B
Connector for
connecting the
controller main unit,
CN3
Fan 1 Fan 2
Fan connection printedcircuit board
The Power Mate i system software consists of the components listed
below:
Name Specification Storage location Remark
Power Mate iD basic function A02B0259H501#88E0 Memory module CNC section control
Power Mate iH basic function A02B0259H521#88F0
A02B0259H521#88F1
Memory module CNC section control
Digital servo function A02B0259H590#9090
A02B0259H590#9096
A02B0259H591#90A0
A02B0259H591#90B0
Memory module Servo section control
PMCSB5 function A02B0259H580#407B
A02B0259J583#407B
Memory module PMC section control
PMCSB6 function A02B0259H580#407B
A02B0259J581#407B
A02B0259J583#407B
Memory module PMC section control
Boot software A02B0259H500#881I CPU card Boot function
2.2.4
Fan Unit Configuration
D Fan unit specifications
D Fan unit configuration
2.2.5
System Software
Configuration

Leave a Reply

Your email address will not be published. Required fields are marked *