Fanuc Power Mate i-D/H Maintenance Manual

2. HARDWARE
B63175EN/03
124
CNM1B:
Memory card
BAT1: Battery
JD41: Display link
CPU:
CPU card
JA47: MPG, analog input
JD42: RS232C
JD1A1: I/O Link (master)
JA11: Spindle
JA46: Position coder
JD40: RS422 (DPL/MDI)
LEDM2: Blown fuse indicator LED
POS AI:
Option card
CP1 (lower): 24 VDC input
FUS1
Huse
CB155 (lower): Builtin I/O
SERVO:
Axis control
card
LEDM1: LED display
CA54:
Servo check
DMM1:
Memory
module
JNA:
Back-
panel
JD1B:
From the I/O Link
(slave) at the
preceding stage
JD1A:
To the I/O Link
(slave) at the
following stage
FG terminal: Grond terminal
for signals
PSW: Pushbutton switch
MTSW: Rotary switch
CB156 (upper): Builtin I/O
CP2 (upper): 24 VDC output
Short pin
VBT1
NOTE
1 For the LEDs and switches, see Section 2.2.3.
2 Short pin VBT1 is used for testing. Leave this pin connected
as is.
D Connector and LED
locations

Leave a Reply

Your email address will not be published. Required fields are marked *