Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
2. HARDWARE
149
Name Specification
Printed circuit board basic unit of the
separate detector interface unit
A20B21000270
LED 1
Power supply connector
On the board side: CP11B
On the upper side: CP11A
JF101 (Firstaxis separate detector)
JF102 (Secondaxis separate detector)
JF103 (Thirdaxis separate detector)
JF104 (Fourthaxis separate detector)
JA4A
FSSB connector
for connection with
the upper unit,
COP10B
FSSB connector
for connection with
the lower unit,
COP10A
FUSE1
Connector for
connection with the
expansion unit,
CNF1
LED 2
Name Color Meaning Required action
LED1 Green The power has been turned
on to the unit, and the power
supply circuit of the unit
operates normally.
If this LED remains off:
1) Check the input power
supply.
2) Check the fuse FUSE1.
3) Replace the unit.
LED2 Green FSSB communication with
the Power Mate is performed
normally.
If this LED remains off:
1) Check the FSSB cable.
2) Check the Power Mate
status.
3) Replace the unit.
2.3.19
Basic Unit of the
Separate Detector
Interface Unit
D Specification
D Connector and LED
locations

Leave a Reply

Your email address will not be published. Required fields are marked *