Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
2. HARDWARE
191
This subsection applies to the detachable LCD/MDI.
Table 2.7.5(a) Specification of detachable LCD/MDI
Name
Specification
Detachable LCD/MDI A02B0166C271#R
A02B0166C271#S
The detachable LCD/MDI is equipped with the CRT control
printedcircuit board and 7.2 monochrome LCD printedcircuit board.
(1)Turn off the power to the LCD/MDI.
(2)Remove the 8 screws from the front panel of the detachable
LCD/MDI, and then take out the metal plate on which the LCD and
keyboard are mounted. (Be careful because the metal plate is
connected with main unit with cables.)
(3)The CRT control printedcircuit board and 7.2 monochrome LCD
printedcircuit board are on the rear of the metal plate. Replace the
fuse on the CRT control printedcircuit board according to Subsection
2.7.2 or the fuse on the 7.2 monochrome LCD printedcircuit board
according to Subsection 2.7.3.
(4)Put the metal plate, on which the LCD and keyboard are mounted,
back to the original place, and attach and fasten the 8 screws to the
front panel.
This subsection applies to the detachable LCD/MDI type B.
Table 2.7.6(a) Specification of detachable LCD/MDI type B
Name
Specification
Detachable LCD/MDI type B A02B0166C291#R
The detachable LCD/MDI type B is equipped with the CRT control
printedcircuit board and 8.4 color LCD printedcircuit board.
(1)Turn off the power to the detachable LCD/MDI type B.
(2)Remove the 10 screws from the rear panel of the detachable LCD/MDI
type B, and then take out the metal plate on which the CRT control
printedcircuit board and power supply are mounted. (Be careful
because the metal plate is connected with main unit with cables.)
(3)Replace the fuse on the CRT control printedcircuit board according
to Subsection 2.7.2 or the fuse on the 8.4 color LCD printedcircuit
board according to the following procedure.
(4)Put the metal plate, on which the CRT control printedcircuit board
and power supply are mounted, back to the original place, and attach
and fasten the 8 screws to the rear panel.
2.7.5
DetachableLCD/MDI
Fuse
2.7.6
Detachable LCD/MDI
Type B Fuse

Leave a Reply

Your email address will not be published. Required fields are marked *