Fanuc Power Mate i-D/H Maintenance Manual

2. HARDWARE
B63175EN/03
198
Battery latch
Lithium battery
Battery
connector
(5)Remove the old battery, insert a new one into the battery holder, and
attach the connector. Confirm that the battery is latched firmly.
WARNING
Using other than the recommended battery may result in the
battery exploding.
Replace the battery only with the specified battery
(A02B0200K102).
CAUTION
1 Before replacing the battery, check that a backup copy of
the latest SRAM memory data has been made.
2 When replacing the battery, the power to the machine must
be off. When the power to the machine is left on, only those
who have been educated in maintenance and safety can
replace battery.
3 Complete the battery replacement steps (3) to (5) within 30
minutes. If the battery is left disconnected for a long time,
the contents of the SRAM memory will be lost.
4 It is recommended that the SRAM memory contents be
backed up to the builtin FROM of the Power Mate i
immediately before the battery replacement. Then, data
can be easily restored in case the memory contents are lost.
See Appendix E for how to take a backup copy.

Leave a Reply

Your email address will not be published. Required fields are marked *