Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
2. HARDWARE
199
Dispose of used batteries as follows.
(1)Small quantities (less than 10)
Discharge the batteries and dispose of them as ordinary unburnable
waste.
(2)Large quantities
Please consult FANUC.
(1)Prepare two new alkaline dry cells (size D).
(2)Turn the machine (Power Mate i) on.
(3)Remove the battery case cover.
(4)Replace the batteries, paying careful attention to their orientation.
(5)Replace the battery case cover.
CAUTION
When replacing the dry cells while the power is off, use the
same procedure as that for lithium battery replacement
procedure, described above.
Dry cell × 2
Cover
Connection terminal
on the rear
Battery case
Mounting hole × 4
Replacing the alkaline
dry cells (size D)

Leave a Reply

Your email address will not be published. Required fields are marked *