Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
2. HARDWARE
205
(6)The manufacturer of the LCD can be identified by the way its backlight
lid is mounted.
Hitachi
Make the LCD screen face toward you, remove the 3 latches from the
left side and then the lid. (See Fig. 2.9.1 (b).)
Sharp
Make the LCD screen face toward you, remove the 3 screws from the
left side and then the lid. (See Fig. 2.9.1 (c).)
(7)Replace the backlight inside the LCD with a new one.
(8)To assemble, reverse this procedure.
Screw
mentioned in (4)
Screw
mentioned in (4)
Screw mentioned
in (5)
Screw mentioned
in (5)
LCD cable
connector
Backlight power
supply cable
Fig. 2.9.1 (a) LCD rear view (with the protection cover removed)
Connector
Bracket
Display surface of LCD unit
Backlight
Fig. 2.9.1 (b) For the backlight manufactured by Hitachi

Leave a Reply

Your email address will not be published. Required fields are marked *