Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
2. HARDWARE
211
(5)Make the display screen of the LCD face upward, and remove the 3
latches from the left side and then the lid.
(6)Replace the backlight in the case with a new one.
(7)To assemble, reverse the above procedure. When mounting the unit
on the cabinet, run the backlight power supply cable on the inside of
the protection plate so that the cable will not be caught in between.
Nut for the ornamental plate
Nut for the ornamental plate
Flexible cable for
the touch panel
Backlight power
supply cable
Fig. 2.9.5(a) Rear view of the monochrome LCD with touch panel (with the protection plate removed)
Connector
Bracket
Display surface of LCD unit
Backlight
Fig. 2.9.5(b) How to remove the backlight

Leave a Reply

Your email address will not be published. Required fields are marked *