Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
2. HARDWARE
223
Table 2.13 (a) Heat dissipated for control unit
Unit
Heat loss
Control unit
(No option board is included.)
25W
Option board
HSSB board 4W
I/O LinkII slave board 6W
I/O LinkII slave board B 6W
PROFIBUSDP master board 6W
PROFIBUSDP slave board 6W
DeviceNet master board
DeviceNet master board B
DeviceNet slave board
DeviceNet slave board B
DeviceNet slave board C
5W
Ethernet board
Fast Ethernet board
6W
FLnet board 6W
External I/O card D/E
5 + 0.175(W)
where n is the number of input points
that are turned on simultaneously
I/O Unit AIF01A, AIF01B 1.2W
AID32A, AID32B 1.2 + 0.23(W)
where n is the number of input points
that are turned on simultaneously
AID16C, AID16D 0.1 + 0.21(W)
where n is the number of input points
that are turned on simultaneously
AID32E, AID32F 0.1 + 0.23(W)
where n is the number of input points
that are turned on simultaneously
I/O Link connection unit 4W
Basic connector panel I/O module 5 + 0.175 x n (W) where n is the number
of input points that are turned on
simultaneously
Branchout I/O module expansion
B/C/D
2.5W
Operators panel I/O module A1 8.5W
Operators panel I/O module B1/B2 7.5 + 0.175 x n (W) where n is the
number of input points that are turned on
simultaneously
Separate detector interface unit,
basic unit
9W
Separate detector interface unit,
basic unit + additional unit
14W
FSSB I/O module basic unit 7.5 + 0.175 x n (W) where n is the
FSSB I/O module basic unit +
expansion unit
number of input points that are turned on
simultaneously
2.13
HEAT DISSIPATED
BY EACH UNIT

Leave a Reply

Your email address will not be published. Required fields are marked *