Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
3. INPUT AND OUTPUT OF DATA
251
Input/outputrelated parameters can be set on the ALL IO screen.
Parameters can be set, regardless of the mode.
Setting input/outputrelated parameters
1 Press function key
SYSTEM
.
2 Press the rightmost soft key
(continuous menu key) several
times.
3 Press soft key
[ALL IO] to display the ALL IO screen.
NOTE
1 If program or floppy is selected in EDIT mode, the program
directory or floppy screen is displayed.
2 When the power is first turned on, program is selected by
default.
READ/PUNCH (PROGRAM) O1234 N12345
MDI
*
* * * * * * * * * * * *
12:34:56
PRGRM PARAM OFFSET (OPRT)
I/O CHANNEL 1 TV CHECK OFF
DEVICE NUM. 0 PUNCH CODE ISO
BAUDRATE 4800 INPUT CODE ASCII
STOP BIT 2 FEED OUTPUT FEED
NULL INPUT (EIA) NO EOB OUTPUT (ISO) CR
TV CHECK (NOTES) ON
(0:EIA 1:ISO)>1_
MACRO
4 Select the soft key corresponding to the desired type of data (program,
parameter, and so forth).
5 Set the parameters corresponding to the type of input/output unit to be
used. (Parameter setting is possible regardless of the mode.)
3.3.1
Setting
Input/outputrelated
Parameters
Procedure

Leave a Reply

Your email address will not be published. Required fields are marked *