Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
3. INPUT AND OUTPUT OF DATA
267
Unnecessary saved files can be deleted from a memory card.
Deleting files
1 Press the rightmost soft key (continuous menu key) on the ALL
IO screen, described in Section 3.3.1.
2 Press soft key
[MCARD].
3 Place the Power Mate i in the emergency stop state.
4 When a memory card is inserted, the state of the memory card is
displayed as shown below.
S 0 T0000
EDIT **** - - EMG- - 12: 15: 00
[FORMAT] [ SAVE ] [ ] [DELETE] [ ]
READ/PUNCH(MCARD) O1234 N12345
CNC RAM
256K byte 2. 000M byte S- RAM
File ( 1/ 1)
SRAM256A. FDB 262144 byte 97/ 01/ 23
Select : All data
Memory card
Message
5 Press soft key [DELETE].
6 With cursor keys
and , select the file to be deleted from the
memory card.
7 After checking the file selection, press soft key
[EXEC].
8 As detection is being performed, the message DELETING blinks in
the message field.
9 Upon the completion of deletion, the message COMPLETED is
displayed in the message field
NOTE
An SRAM of 1M bytes will contain multiple files. To delete
the contents of such an SRAM, delete all the contained files.
Deleting files
Procedure
EXECCAN

Leave a Reply

Your email address will not be published. Required fields are marked *