Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
4. INTERFACE BETWEEN NC AND PMC
311
5. Enter the password and press the [INPUT] key.
NOTE
The entered password is not displayed. (Echo back is not
performed.)
When the password is not correctly specified, the error message is
displayed.
FALSE PASSWORD
At this time, the display returns to the release requirement of
password by pressing the [INPUT] key.
When the password is correctly specified, the protection is
released.
6. The sequence program is displayed.
> N0001
RD X0000.0
Step number
Instruction
(2)Confirming the ladder mnemonics
1. Cursor scroll (scroll per step)
Pressing the [ ] cursor key displays the instruction one step before
that currently displayed. Pressing the [ ] cursor key displays the
instruction one step after that currently displayed.
2. Specifying the step number
Entering [No.], [step number], [INPUT], then displays the
instruction having the entered step number.
(The [ ] cursor key can be used instead of the [INPUT] key.)
(Example) [No.], [1], [2], [3], [ ]
N0123
SUB 50 PSGNL
3. Relay search
Entering [address number] then [ ] searches for the relay
including the entered address.
(Example) [X],[0], [.], [2], [ ]
N0105
AND X0000.2

Leave a Reply

Your email address will not be published. Required fields are marked *