Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
4. INTERFACE BETWEEN NC AND PMC
315
4 The current execution state of the sequence program is displayed on
the screen. Pressing the [ ] or [ ] key switches the state between
running and stopped.
5 Pressing the [CAN] or [WRITE] key displays the PMC programmer
menu.
NOTE
When the sequence program cannot be started (RUN), the
alarm of PMC occurred. Please confirm the alarm status
referring to 4.4.10 Error List.
Displayed error message Error description (operator action)
1 COIL NOTHING No coil is specified for a functional
instruction using a coil.
2 COM FUNCTION MISSING The use of the COM (SUB9) functional
instruction is incorrect.
3 END FUNCTION MISSING The END1 or END2 functionalinstruction
is missing (or ERROR NET).
4 JUMP FUNCTION MISSING The use of the JMP (SUB10) functional
instruction is incorrect.
5 LADDER BROKEN The ladder program is corrupted.
6 OBJECT BUFFER OVER The user program RAM is full. (Perform
condensation or reduce the size of the
ladder program.) (Note)
7 PLEASE CLEAR ALL The sequence program has become
unrecoverable due to poweroff during
editing.
8 1ST LEVEL EXEC TIME
OVER
The ladder first level is too great.
9 FUNC. PARAM NO. OUT OF
RANGE
There is out of range error in the
parameter of functional instruction TMR,
TMRB, CTR, DIFU, DIFD. It is displayed
when mnemonics editing is finished.
10 FUNC. PARAM NO.
DUPLICATE
There is multiple use error in the
parameter of functional instruction TMR,
TMRB, CTR, DIFU, DIFD. It is displayed
when mnemonics editing is finished.
11 Nxxxxx yyyy (RNG)
P001 nnn
There is out of range error in the
parameter of functional instruction TMR,
TMRB, CTR, DIFU, DIFD.
xxxxx : Step number
yyyy : Functional instruction
nnn : Parameter
12 Nxxxxx yyyy (DUP)
P001 nnn
There is multiple use error in the
parameter of functional instruction TMR,
TMRB, CTR, DIFU, DIFD.
xxxxx : Step number
yyyy : Functional instruction
nnn : Parameter
4.4.6
Error Messages
(for Ladder Mnemonics
Editing)

Leave a Reply

Your email address will not be published. Required fields are marked *