Fanuc Power Mate i-D/H Maintenance Manual

4. INTERFACE BETWEEN NC AND PMC
B63175EN/03
324
The address relationships between the Power Mate iD/H and PMC
interface signals are shown below.
Y000 or later/
Y1000 or later
X000 or later/
X1000 or later
CNC
G000 or later
F000 or later
PMC MT
The details of the Power Mate iD/H and PMC interface signal addresses
are listed below. In the list, #D represents signals dedicated to the Power
Mate iD, while #H represents those dedicated to the Power Mate iH.
Example 1:
#7
G005
#6
AFL
#2
SFIN#D
#1 #0
MFIN
Example 2 explains how to specify an address for referencing data on
a byte, word, or doubleword access basis.
Example 2:
To reference an M code as a byte (M00 to M07), word (M00 to M15),
or doubleword (M00 to M31), specify F010.
M07
#7
F010
#6
M06
#2
M02
#1
M01
#0
M00
M15F011 M14 M10 M09 M08
M23F012 M22 M18 M17 M16
M31F013 M30 M26 M25 M24
4.7
ADDRESS LIST

Leave a Reply

Your email address will not be published. Required fields are marked *