Fanuc Power Mate i-D/H Maintenance Manual

1. DISPLAY AND OPERATION
B63175EN/03
18
(1)Function keys
Function keys indicate large items like chapters in a document.
<POS>
Indicates the current position.
<PRGRM>
Conducts the following:
In EDIT mode ...edits and displays the program in the memory
In automatic operation ...displays command value.
<VAR>
Used to display offset settings and to set and display macro
variables.
<PARAM DGNOS>
Used to set and display parameter, diagnostic, and PMC parameter.
<ALARM>
Display of Alarm number and external message.
(2)Keyboard functions
Table 1.1.2 MDI Keyboard functions
Key
Functions
Address/numerical key Press these keys to input alphabetic, numeric, and
other characters.
INPUT ( ) key
INPUT
When an address or a numerical key is pressed,
the letter or the numeral is input once to the key
input buffer, and it is displayed on the DPL. To input
the data, press the INPUT key.
Cancel ( ) key
CAN
Press this key to cancel character or sign input to
the key input buffer.
(Example)
When the key input buffer displays N0001, N0001
is canceled with this key.When an alarm is
displayed, depressing CAN will reset the alarm
message.
Cursor shift keys There are two kinds of cursor shift key described
below.
: This key is used to shift the cursor a short
distance in the forward direction.
: This key is used to shift the cursor a short
distance in the reverse direction.
READ /WRITE key Press this key to start I/O operation with an I/O
device or memory card.
Pressing a key activates the corresponding I/O
device. Be careful not to press the wrong key.

Leave a Reply

Your email address will not be published. Required fields are marked *