Fanuc Power Mate i-D/H Maintenance Manual

1. DISPLAY AND OPERATION
B63175EN/03
22
1) When the CRT/MDI has started normally, but cannot communicate
with the Power Mate i (if the screen shown in Section 1.2.1 has not yet
been displayed)
*** INTELLIGENT CRT/MDI 8813/03 ***
ROM PARITY CHECK OK
WAITING FOR CRT DATA
NOTE
If nothing appears on the screen, it indicates that the
CRT/MDI has failed to start.
When the DPL/MDI starts normally, but communication with the Power
Mate i does not
ROM PARI. OK
RAM CHECK OK
NOTE
If nothing appears on the screen, it indicates that the
DPL/MDI has failed to start.
1.2.4
If it is Definitely
Impossible to Start the
Controller

Leave a Reply

Your email address will not be published. Required fields are marked *