Fanuc Power Mate i-D/H Maintenance Manual

APPENDIX
B63175EN/03
C. BOOT SYSTEM
513
This screen is used to delete a user file from FROM.
SYSTEM DATA CHECK 1/1
FILE DIRECTORY (FLASH ROM : 4MB)
1 NC BASIC ( 10)
2 DG SERVO ( 1)
3 PMC0BSC ( 2)
4 PMCRB ( 1)
5 PCD 0.5M ( 4)
END
*** MESSAGE ***
SELECT FILE AND HIT SELECT KEY.
[ SELECT ][ YES ][ NO ][ UP ][ DOWN ]
(1)
(2)
(3)
(4)
(1) : Screen title
(2) : Names of files in FROM The number of management units
constituting each file appears in parentheses to the right of the file
name.
(3) : Returning to the previous menu
(4) : Message
1 Position the cursor to the name of the file to be deleted. Press the
[SELECT] soft key.
2 The system displays the following confirmation message :
*** MESSAGE ***
DELETE OK ? HIT YES OR NO.
3 To start the deletion, press the [YES] key. To cancel, press [NO].
*** MESSAGE ***
DELETING ROM FILE IN FLASH MEMORY.
4 When deletion terminates normally, the system displays the following
message. Press the [SELECT] key.
*** MESSAGE ***
DELETING COMPLETE. HIT SELECT KEY.
C.2.3
System Data Delete
Screen
D Description
D Screen configuration
(CRT/MDI)
D Screen configuration and
operating procedure
(DPL/MDI)

Leave a Reply

Your email address will not be published. Required fields are marked *