Fanuc Power Mate i-D/H Maintenance Manual

APPENDIXC. BOOT SYSTEM
B63175EN/03
516
2 Names of saved files
Files saved from FROM to a memory card have the following names:
FROM Memory card
PMCRB
PD1M256K
PD1M512K
CEX1.0M
CEX 2.0M
³
³
³
³
³
PMC_RB. XXX
PD1M256K.XXX
PD1M512K.XXX
CEX_10M.XXX
CEX_20M.XXX
XXX corresponds to the file extension of MSDOS format files. A
number from 000 to 031 is specified for XXX. For example, if the
PMCRB file in FROM is saved to a memory card that does not yet
contain a file whose name begins with PMCRB, the saved file is
named PMCRB.000. If, however, that file is saved to a memory card that
already contains a file named PMCRB.000, the saved file is named
PMCRB.001. As files are added, the extension is incremented up to a
maximum of PMCRB.031. Any nolonger used numbers in the
sequence of the extension numbers are used in as cending order. If two
or more files having identical names but different extension numbers are
normally saved to the memory card, check the file names displayed
subsequently.
This screen is used to collectively save and restore parameters, programs,
and other data in SRAM memory, retained after the Power Mate i power
is turned off, to and from a memory card.
Select 4 SRAM DATA BACKUP on the SYSTEM MONITOR MAIN
MENU screen. The following screen is displayed.
SRAM DATA BACKUP
1. SRAM BACKUP (CNC ³ MEMORY CARD)
2. RESTORE SRAM (MEMORY CARD ³ CNC)
END
SRAM SIZE : 256K (BASIC)
FILE NAME : SRAM256A. FDB
*** MESSAGE ***
SELECT MENU AND HIT SELECT KEY.
[ SELECT ][ YES ][ NO ][ UP ][ DOWN ]
(1)
(2)
(3)
(4)
(5)
(6)
(1) : Screen title
(2) : Menu
C.2.5
SRAM DATA BACKUP
Screen
D Description
D Screen configuration
(CRT/MDI)

Leave a Reply

Your email address will not be published. Required fields are marked *