Fanuc Power Mate i-D/H Maintenance Manual

APPENDIXC. BOOT SYSTEM
B63175EN/03
520
Selecting MEMORY CARD FILE DELETE displays the file selection
screen, shown below. Pressing the [] or [] key on the DPL displays the
names of the files stored on the memory card. Once the name of the file
to be deleted appears, pressing the [INPUT] key deletes that file.
MEMORY DELETE
*BASIC.DAT
: File selection screen
During deletion, the following screen is displayed:
BASIC.DAT
DELETE
: The name of the file being deleted is
displayed and DELETE blinks.
Once deletion has been completed, the file selection screen is displayed
again. To end the operation, press the [CAN] key. The initial screen is
displayed.
This function is used to format a memory card. Memory cards must be
formatted before they can be used for the first time or before they can be
reused after their data has been destroyed or lost because of, for example,
battery failure.
1 From the SYSTEM MONITOR MAIN MENU screen, select 7.
MEMORY CARD FORMAT.
2 The system displays the following confirmation message.
Press the [YES] key.
*** MESSAGE ***
MEMORY CARD FORMAT OK ? HIT YES OR NO.
3 The system displays the following message during formatting :
*** MESSAGE ***
FORMATTING MEMORY CARD.
4 When a card has been formatted normally, the system display the
following message.
Press the [SELECT] key.
*** MESSAGE ***
FORMAT COMPLETE. HIT SELECT KEY.
D Screen configuration and
operation procedure
(DPL/MDI)
C.2.7
MEMORY CARD
FORMAT Function
D Description
D Operating procedure

Leave a Reply

Your email address will not be published. Required fields are marked *