Fanuc Power Mate i-D/H Maintenance Manual

APPENDIX
B63175EN/03
C. BOOT SYSTEM
523
The following table lists and explains error messages in alphabetical
order.
Message
( ) is displayed data on DPL/MDI
Description and required action
B BOOT ROM PARITY.
PLEASE POWER OFF.
The contents of the flash memory including BOOT system are
broken. Please replace the CPU card.
C CHANGE MEMORY CARD.
AND HIT YES OR NO.
There is no more space in memory card for SRAM backup
operation. Please change the memory card with sufficient capacity.
D
DELETE ERROR.
HIT SELECT KEY.
(ERROR014)
An attempt to delete a file from flash memory was unsuccessful or
files of memory card cannot be deleted. Retry the deletion. If the
second attempt also fails, the flash memory may have been
damaged or destroyed. Replace the memory module.
DEVICE ERROR (CNC X)
(ERROR032)
An attempt to write data to flash memory was unsuccessful. Retry
the write operation after off power and restart the system. If the
second attempt also fails, the flash memory may have been
damaged or destroyed. Replace the flash memory module.
F
FILE SAVE ERROR.
HIT SELECT KEY.
(ERROR015)
An attempt to write a file to a memory card was unsuccessful.
Check that the memory card is not damaged.
Note) Check that the memory cards battery is not exhausted, that
its circuitry has not been damaged, and that it is securely in-
serted into its slot.
FLASH MEMORY NO SPACE.
(ERROR004)
There is insufficient free flash memory to store the selected file.
Delete any unnecessary files from flash memory or replace to
bigger memory module.
FLASH ROM MODULE NOT EXIST. Flash memory module is not mounted on the selected printed
circuit board.
I
ILLEGAL FORMAT FILE.
(ERROR003)
The selected file cannot be read into flash memory. The selected
file or the header information for flash memory may have been
damaged or destroyed.
ILLEGAL FROM MODULE.
HIT SELECT KEY.
The ID part of flash memory module is illegal. Please confirm the
drawing number of the flash memory module.
ILLEGAL SRAM MODULE.
HIT SELECT KEY.
(ERROR031)
The ID part of SRAM module is illegal. Please confirm the drawing
number of the memory module.
L OADING ERROR.
HIT SELECT KEY.
(ERROR013)
An error occurred while loading data into flash memory.Do not
touch the memory card while loading data.
C.3
ERROR MESSAGES
AND REQUIRED
ACTIONS

Leave a Reply

Your email address will not be published. Required fields are marked *