Fanuc Power Mate i-D/H Maintenance Manual

APPENDIXC. BOOT SYSTEM
B63175EN/03
524
Description and required action
Message
( ) is displayed data on DPL/MDI
M
MAX EXTENSION OVER.
HIT SELECT KEY.
(ERROR022)
The extension number added to a file name exceeds 031. Delete
any unnecessary backup files from the memory card.
MEMORY CARD BATTERY ALARM.
HIT SELECT KEY.
(ERROR002)
The memory cards battery is exhausted. Replace the battery.
MEMORY CARD FULL.
HIT SELECT KEY.
(ERROR021)
The memory card is full. Delete any unnecessary files from the
memory card. Alternatively, replace the memory card with another
card having sufficient free space.
MEMORY CARD IS NOT AVAILABLE.
HIT SELECT KEY.
(ERROR033)
This memory card is not supported. Please use the memory card
that is recommended in the order list.
MEMORY CARD MOUNT ERROR.
HIT SELECT KEY.
(ERROR024)
Accessing to the memory card is failed. Please confirm the memory
card is formatted with FAT format.
MEMORY CARD NOT EXIST.
HIT SELECT KEY.
(ERROR001)
The memory card is not inserted into its slot. Check that the
memory card is pushed fully home.
MEMORY CARD PROTECTED.
HIT SELECT KEY.
(ERROR016)
Although writing to the memory card was selected, the write inhibit
switch is set. Disable the write inhibit switch.
MEMORY CARD RESET ERROR.
HIT SELECT KEY.
(ERROR018)
Access to the memory card has failed. Check whether the memory
card is defective.
MEMORY CARD WRITE ERROR.
HIT SELECT KEY.
(ERROR020)
Write to memory card is failed. Check whether the memory card is
normal.
N NMI OCCURRED.
PLEASE POWER OFF.
Some trouble related to the hardware or the software occurs.
Please confirm the operation to generate the trouble. And please
contact the service division with the information about the edition
number and series number of the BOOT software.
P PLEASE FORMAT FLASH TYPE CARD.
HIT SELECT KEY.
(ERROR030)
The operation to delete file in the flash memory card or to create the
file with the same name that is already exists is executed.Before
those operation, delete all files with FORMAT function.
R ROM PARITY ERROR:NC BASIC.
HIT SELECT KEY.
Parity error is detected in NC BASIC part. With SYSTEM DATA
CHECK, please confirm there exists NC BASIC in the memory
module.
S
SRAM DATA BACKUP ERROR.
HIT SELECT KEY.
(ERROR023)
An attempt to write a backup file to a memory card failed. Check
that the memory card is normal.
SRAM PARITY OCCURRED.
PLEASE POWER OFF.
Parity error is detected during backupping SRAM data. (Warning)

Leave a Reply

Your email address will not be published. Required fields are marked *