Fanuc Power Mate i-D/H Maintenance Manual

APPENDIX
B63175EN/03
D. MEMORY CARD OPERATORS
MANUAL
533
The SRAM memory cards supplied by FANUC used CR2325 or BR2325
batteries.
These batteries are not easily available. In May 1997, therefore, FANUC
changed the battery used in the SRAM memory card to the CR2025. This
type easily available.
When an SRAM memory card using the previous battery (CR2325 or
BR2325) is to be used, a new battery (CR2025) can be used simply by
changing the battery holder.
Target SRAM memory card
1) A87L00010150#jjj
Manufacturer part number: MB98A9jj3320
Battery type
1) Before change: CR2325 or BR2325
D Indication on side of the memory card:
9jj3320 S000 jjjj jjj
2) After change: CR2025 or equivalent
(Common battery used in, for example, calculators)
D Indication on side of the memory card:
9jj3320 9157 jjjj jjj
Changing the battery holder
1) For SRAM memory cards using the old battery (CR2325 or BR2325),
the new battery (CR2025) can be used simply by changing the battery
holder.
2) The battery holder set for the CR2025 is available from suppliers of
Fujitsu electronic device products.
D Ordering information: MB98XXX holder set 9146
D Contents of the set: Battery holder 1, battery (CR2025) 1,
manual 1
D.6.4
Battery

Leave a Reply

Your email address will not be published. Required fields are marked *