Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
F. SETTING/DISPLAY/MAINTENANCE
USING THE MAIN UNIT OF
THE Power Mate i
APPENDIX
551
Number on LED (stays on) Meaning
Power is not on.
The CPU does not operate after powerup.
Start of boot system operation
Start of system operation
Wait for processor ID setting in the system
Completion of processor ID setting in the system
Completion of FANUC bus initialization
Completion of PMC initialization
Completion of hardware configuration
information setting for each module in the system
Completion of PMC ladder initialization
Wait for digital servo initialization
Completion of digital servo initialization
Normal operation status after completion of
initialization
F.3.4
7segment LED
Indication Status
Change at Powerup

Leave a Reply

Your email address will not be published. Required fields are marked *