Fanuc Power Mate i-D/H Maintenance Manual

G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
B63175EN/03
APPENDIX
574
For management purposes, the boot system roughly divides files stored
in the flash memory in the Power Mate i into system files and user files.
These files are explained below.
A system file is a CNC or servo control software file provided by FANUC.
A user file is a file the user can create, such as a PMC sequence program
(ladder) file or PCODE macro program file.
BOOTINIT.EXE performs boot operation and INIT operation with the
following procedure:
Starts BOOTIPL.EXE.
±
Starts Power Mate.
±
Performs boot operations (such as system data loading and user file
backup/restoration).
±
Terminates the boot system (when 10.SYSTEM MONITOR EXIT
is selected).
±
Selects INIT processing.
(INIT processing: Maintenance operation at poweron such as
memory clear)
±
Terminates INIT operation.
(Performs processing for the selected item and automatically
terminates.)
±
Window during normal system operation DPLMDI.EXE is started.
G.4.1.2
System file and user file
D What is a system file?
D What is a user file?
G.4.1.3
Boot operation and INIT
operation

Leave a Reply

Your email address will not be published. Required fields are marked *