Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
577
Use the SYSTEM DATA CHECK screen to display a list of files in the
flash memory in Power Mate, the number of 128KB management units,
and software series and edition of each file.
When 2.SYSTEM DATA CHECK is selected, the following file
information screen appears. Pressing ± or ° displays information of
another file.
CHECK MENU
1.NC BASIC (10)
: File information screen
The number in parentheses indicates the
number of used management units (Unit: 128K
bytes).
When a file name is displayed, pressing the ENTER key displays the
following detailed information (series, ROM number, edition, and
internal management number (up to 16)):
NC BASIC
0.88F0 801A 000
: Detailed file information screen
To terminate the detailed file information screen, press the ENTER key
when END is displayed on the screen. The file information screen
appears again. To return from the file information screen to the initial
screen, press ENTER when END is displayed on the screen.
For a system file with NC BASIC, DG SERVO, or another file name in
the flash memory, parity information is stored for each management unit.
If a nonASCII character or @ is displayed in the file name or parity field
in file information on the check screen, the flash memory may be
destroyed or a destroyed file may be read.
Read the file from the memory card again. For a user file with PMCRB,
PCD 0.5M, or another file name, however, parity information is not stored
for each management unit. For this reason, a nonASCII character or @
displayed in series or edition information does not indicate that the file
is destroyed.
G.4.2.2
SYSTEM DATA CHECK
screen
D Operation procedure
D Others

Leave a Reply

Your email address will not be published. Required fields are marked *