Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
583
The power may be disconnected during editing of an NC program or the
contents of SRAM may be destroyed due to noise or another abnormality.
In such a case, poweron operations such as memory clear can be
executed at poweron.
This window is automatically started after BOOTINIT.EXE is started up
using the boot system startup procedure and the boot system is
terminated.
Select INIT from the main menu of this window, then a target item listed
below from the pulldown menu.
MEMORY ALL CLEAR (Clears all memory.)
MEMORY CLEAR (PARAMETER,OFFSET) (Clears CNC parameters
and offset values.)
MEMORY CLEAR (ALL PROGRAM) (Clears all programs.)
MEMORY CLEAR (PMC PARAMETER) (Clears PMC
parameters.)
MEMORY CLEAR (PMC LADDER) (Clears PMC ladders.)
IGNORE OVER TRAVEL ALARM (Resets the OT alarm.)
START WITHOUT LADDER (Starts the system with
no ladder.)
C LANGUAGE EXECUTOR (MAKE VOID CEXEC)
(Starts up the system
with starting no C
executor application.)
OTHERS (Sends a key code.)
EXIT (Terminates INIT
operation.)
G.4.3
Operating the INIT
System
G.4.3.1
Startup procedure
G.4.3.2
Operation method

Leave a Reply

Your email address will not be published. Required fields are marked *