Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
585
After startup of the Power Mate i, this executable program can be started
to display each screen, set data, and transfer files as listed below.
(Displaying and setting data)
D Displays the current position.
D Displays, edits, and checks CNC programs.
D Displays and sets settings, offset values, and macro variables.
D Displays and sets parameters, diagnostic data (CNC and PMC),
and pitch error compensation.
D Displays alarms and messages.
D Displays the system alarm screen.
(Manipulating files)
D References a file in the personal computer.
D Backs up and restores CNC data (CNC programs, tool offset
values, macro variables, and CNC parameters).
D Prints a file in the personal computer.
D Produces hard copy of the display contents on the DPL/MDI
operation package screen.
Confirm that the Power Mate i system has started up (0 is displayed on
LEDM1 on the Power Mate i main unit when the system starts up), then
start executable program DPLMDI.EXE. If this executable program is
started when the system is not started up, connection is not performed
normally.
G.5
USING DPLMDI.EXE
G.5.1
Overview
D Caution

Leave a Reply

Your email address will not be published. Required fields are marked *