Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
587
Press
F2
PRG
. The program screen appears.
(1)File heading
1 Select a mode. (EDIT or AUTO mode)
2 Select the program screen.
3 Key in address N.
4 Key in a file number.
5 Press
F7
RD
.
One of the following operations is performed according to the
keyedin file number:
1) N0
Beginningofcassette heading is performed.
2) One of N1 to N9999
File heading is performed for the specified file 1 to 9999.
3) N9999
File heading is performed for the file next to the previously
accessed file.
4) N9998
After 9998 is specified, N9999 in 3) is automatically inserted
each time a file is input or output. This status is released by
specifying a number in 1), 2), or 3) or performing a reset.
File heading using N9999
Sequential file heading for contiguous files by specifying N1 to
N9999 gives the same results as file heading for one of N1 to N9999
and file heading for subsequent files by specifying N9999. File
heading by specifying N9999 requires less time, however.
G.5.2.2
Program
D Display operation

Leave a Reply

Your email address will not be published. Required fields are marked *