Fanuc Power Mate i-D/H Maintenance Manual

G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
B63175EN/03
APPENDIX
588
(2)Deleting a file
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
3 Unlock the protect key.
4 Key in address O.
5 Key in the number of a file to be deleted (1 to 9999).
6 Press
F8
WRT
. This operation deletes the file having the number
specified in 5.
S File numbers after deletion
After a file is deleted, the numbering sequence of any files that
follow recedes one position.
S Protect switch
To delete a file, place the protect switch in the write enable state.
(3)Program (input)
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
3 Press
F7
RD
.
S Inputting a program in the background
This operation registers a program in the same way as in the
foreground except that it registers the program in the background
editing area.
To register a program in the foreground program memory in the
same way as with the editing operation, the following operation is
required at the end:
Press
F2
PRG
and
Back
Space
simultaneously.
(4)Program (output)
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
3 Select a punch code (ISO or EIA) on the setting screen.
4 Press address O.
5 Key in a program number. When 9999 is keyed in, all programs
in memory are output.
6 Press
F8
WRT
. The program with the keyedin number is output.
(5)Editing a program
(a) Search
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
1) Scanning method
a) When cursor key
is pressed
On the screen, the cursor moves one word position in the
forward direction.
The cursor is displayed on the selected word.

Leave a Reply

Your email address will not be published. Required fields are marked *