Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
589
b) When cursor key is pressed
On the screen, the cursor moves one word position in the reverse
direction.
The cursor is displayed on the selected word.
S Pressing cursor key
or causes a continuous scan.
2) Word search method
1 Key in an address.
2 Key in a numeric key. The above operations specify a word to
be searched for.
3 Press cursor key . A search starts.
When the search is complete, the cursor is displayed on the
specified word.
Pressing cursor key
starts a backward search.
3) Address search method
1 Key in an address.
2 Press cursor key
. A search starts.
When the search is complete, the cursor is displayed on the
specified address.
Pressing cursor key
starts a backward search.
(b)Inserting a word
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
3 Search for or scan the word immediately before the place where a
word is to be inserted.
4 Press an address to be inserted.
5 Key in a numeric value.
6 Press
Insert
. The word is inserted.
(c) Changing a word
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
3 Search for or scan a word to be changed.
4 Press an address to be changed.
5 Key in a numeric value.
6 Press
Home
. The word is changed.
(d)Deleting a word
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
3 Search for or scan a word to be deleted.
4 Press
Delete
. The word is deleted.

Leave a Reply

Your email address will not be published. Required fields are marked *