Fanuc Power Mate i-D/H Maintenance Manual

G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
B63175EN/03
APPENDIX
590
(e) Deleting one block
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
3 Search for or scan a block to be deleted.
4 Press
;
and
Delete
simultaneously.
The range from the word at the cursor to the EOB is deleted.
(f) Deleting multiple blocks
A range from the word at the cursor to the block with the specified
sequence number is deleted.
1 Perform mode selection to put the system in the EDIT mode.
2 Select the program screen.
3 Search for or scan a word in the starting block sequence to be
deleted.
4 Press address N.
5 Key in the numeric value indicating the sequence number of the last
block to be deleted.
6 Press
Delete
.
The range from the word at the cursor to the block with the
specified sequence number is deleted.
(6)Program number search
1) Method 1
1 Perform mode selection to put the system in the EDIT or AUTO
mode.
2 Select the program screen.
3 Press address O.
4 Key in the number of a program to be searched for.
5 Press cursor key
to start a search.
When the search is complete, the program is displayed.
2) Method 2
1 Perform mode selection to put the system in the EDIT or AUTO
mode.
2 Select the program screen.
3 Press address O.
4 Press cursor key
to start a search.
When cursor key
is held down in the EDIT mode, registered
programs are sequentially displayed.
After all registered program numbers are displayed, the first
program is displayed again.

Leave a Reply

Your email address will not be published. Required fields are marked *