Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
593
(11) Creating a program
(a) Creating a program using the keyboard
1 Select the EDIT mode.
2 Select the program screen.
3 Press address O.
4 Key in the number of a program to be registered.
5 Press
Insert
. The program is registered and displayed.
(b)Automatically inserting sequence numbers
Set the increment value for sequence numbers in parameter No. 3216
in advance.
1 Select the EDIT mode.
2 Select the program screen.
3 Press address N.
4 Key in the initial value for N.
5 Press
Insert
.
6 Insert 1block data for each word.
7 Press
;
.
8 Press
Insert
.
After this operation, for example, when the initial value is 10 and
the parameter is set to 2, N12 is inserted in the next line and
displayed.
(12)Creating a program in the TEACH IN mode
1 Select the TEACHIN JOG or TEACHIN STEP mode.
2 Move the machine and determine the position.
3 Select the program screen.
4 Key in address X.
5 Press
Insert
. The machine position on the Xaxis is registered in
memory.

Leave a Reply

Your email address will not be published. Required fields are marked *