Fanuc Power Mate i-D/H Maintenance Manual

G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
B63175EN/03
APPENDIX
594
(13)Editing a macro statement
1 Select the EDIT mode.
2 Select the program screen.
3 Press
Enter
. The system is switched from the program editing
mode to the macro statement editing mode.
The macro statement at the cursor is displayed in the data input line
one word at a time as follows:
>=#101*1.0
The underline indicates the
cursor blinking on =.
4 Press
Home
to register (replace) the character string displayed in the
data input line and terminate macro statement editing.
5 Press
Back
Space
to cancel the macro statement editing screen.
6 Screen switching with a function key cancels the macro statement
editing screen.
1 Press
to move the cursor in the forward direction or to
move it in the reverse direction.
Example
>=#101*1.0
The underline indicates the
cursor blinking on =.
When is pressed six times, the display changes as follows:
>=#101*1.0
D Display operation
D Edit operation

Leave a Reply

Your email address will not be published. Required fields are marked *