Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
595
2 Press
Delete
to delete one character at the cursor.
Example
=#101*1.0
When
DELETE
is pressed once, the display changes as follows:
>=#101*.0
1 is deleted and the cursor moves to the . position.
3 Press
Insert
to insert one blank character at the cursor.
Example
>=#101*.0
When
Insert
is pressed twice, the display changes as follows:
>=#101* .0
4 Press an alphanumeric key to display the character at the cursor.
5 Press
Home
to register (replace) the edited character string.
CAUTION
1 Up to 15 characters can be edited.
2 If an alarm occurs during edit processing, the edit
processing is canceled, then the alarm screen is displayed.
3 When a macro statement is longer than 15 characters, up
to 15 characters are to be edited in 1. The 16th and
subsequent characters cannot be edited.
If the registration key is pressed with a macro statement
longer than 15 characters displayed, the macro statement
is registered with the 16th and subsequent characters
deleted.
4 This function performs no syntax check.

Leave a Reply

Your email address will not be published. Required fields are marked *