Fanuc Power Mate i-D/H Maintenance Manual

G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
B63175EN/03
APPENDIX
600
3) Setting null for a variable
Press
.
. Null is input for the macro variable and a blank is
displayed.
(1)Custom macro common variable (input)
1 Select the EDIT mode.
2 Select the custom macro variable screen.Press
F3
MEN
VAR
. The offset
screen, setting screen, and custom macro variable screen
alternately appear. Select the custom macro variable screen.
3 When custom macro common variables are stored in a file in a
device, perform file heading as required.
4 Press
F7
RD
to input the custom macro common variables.
During input, RD is displayed as follows:
> RD
NOTE
The custom macro common variables are input as a
program. The variables are registered as common
variables by executing the input program.
(2)Custom macro common variable (output)
1 Select the EDIT mode.
2 Select the custom macro variable screen.
Press
F3
MEN
VAR
. The offset screen, setting screen, and custom macro
variable screen alternately appear. Select the custom macro
variable screen.
3 Press
F8
WRT
to output the custom macro common variables.
During output, WRT is displayed as follows:
> WRT

Leave a Reply

Your email address will not be published. Required fields are marked *