G. MAINTENANCE USING A NOTEBOOK
When PMC data is displayed, pressing
changes the data type
for display and setting.
is pressed, the data type changes in the following
One–byte bit One–byte
The current data type is one–byte bit or decimal when the
difference between adjacent numbers is 1, two–byte
decimal when it is 2, or four–byte decimal when it is 4.
1 Set DWE to 1 on the setting screen.
2 Press the key of a PMC address to be displayed.
3 Press the number of the PMC address to be displayed.
to display the PMC data.
to select a data type.
to input and display the data value.
7 After setting and checking all PMC data, display the setting screen
and set DWE to 0 again.
Data in the following areas can be displayed and set:
X0000 to 0127, X1000 to 1063
Y0000 to 0127, Y1000 to 1063
G0000 to 0511
F0000 to 0511
A0000 to 0024
R0000 to 0999, R9000 to 9117
T0000 to 0079
K0000 to 0019
C0000 to 0079
D0000 to 1859
D Changing the data type
D Rewriting procedure