Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
613
D For the Power Mate iH (when the number of controlled axes is 7 or
more or bit 0 (PCTD1) of parameter No. 0370 is set to 0)
ACT.F 1000MM/M S 0 T0000
JOG **** *** *** ALM 09:06:35
ACTUAL POSITION O0001 N12345
(ABSOLUTE) (MACHINE)
X 0.000 X 0.000
Y 0.000 Y 0.000
Z 0.000 Z 0.000
A 0.000 A 0.000
B 0.000 B 0.000
C 0.000 C 0.000
U 0.000 U 0.000
V 0.000 V 0.000
D For the Power Mate iH (when the number of controlled axes is 6 or
less and bit 0 (PCTD1) of parameter No. 0370 is set to 1)
ACT.F 1000MM/M S 0 T0000
JOG **** *** *** ALM 09:06:35
ACTUAL POSITION(ABSOLUTE) O0001 N12345
X 1 0 0 . 0 0 0
Y 0 . 0 0 0
Z 0 . 0 0 0
A 0 . 0 0 0
B 0 . 0 0 0
C 0 . 0 0 0
NOTE
No CRT/MDI keys can be used when the DPL/MDI
operation package is used.

Leave a Reply

Your email address will not be published. Required fields are marked *