Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
APPENDIX
615
Explanation of parameter
0382 PCTANS
Number Data
PCTANS Timeout time for waiting for a response packet from the DPL/MDI
operation package
[Data type] Word
[Unit of data] msec
[Valid data range] 1000 to 30000 (internal setting when a value of 0 or no value is set: 5000)
Explanation of parameter
0383 PCTRP1
Number Data
PCTRP1 Time for detecting key input repetition for the DPL/MDI operation
package
(Time until the first key repetition is detected)
[Data type] Word
[Unit of data] msec
[Valid data range] 100 to 3000 (internal setting when a value of 0 or no value is set: 1000)
Explanation of parameter
0384 PCTRP2
Number Data
PCTRP2 Time for detecting key input repetition for the DPL/MDI operation
package
(Time until the second or subsequent key repetition is detected)
[Data type] Word
[Unit of data] msec
[Valid data range] 10 to 3000 (internal setting when a value of 0 or no value is set: 30)
If the CPU in the personal computer is exclusively used by an application
other than the DPL/MDI operation package or the OS, Power Mate may
automatically disconnect the DPL/MDI operation package. In this case,
terminate the DPL/MDI operation package application in the personal
computer, then restart it. (The application is automatically connected
again.)
If this status frequently occurs, adjust the values of parameters Nos. 0381
and 0382.
D Additional information

Leave a Reply

Your email address will not be published. Required fields are marked *