Fanuc Power Mate i-D/H Maintenance Manual

G. MAINTENANCE USING A NOTEBOOK
PERSONAL COMPUTER
B63175EN/03
APPENDIX
616
This section explains error messages and actions to be taken.
The following table lists the explanation of and the action to be taken for
each message displayed when an error occurs during boot system
operation using BOOTIPL.EXE in the DPL/MDI operation package.
D
DELETE ERROR
HIT <ENTER>.
An attempt to delete a file from the flash memory failed or a file could not be
deleted from a memory card. If an attempt to delete the file is made again and
the same error occurs, the flash memory may be destroyed. Replace the
memory module.
D
DEVICE ERROR
HIT <ENTER> .
The flash memory could not be written successfully. Turn off the power, then
restart up the system. If the same message is displayed again, the flash
memory may be destroyed. Replace the flash memory module.
FILE SAVE ERROR
HIT <ENTER>
A file could not be written onto a memory card successfully. Check that the
memory card status is normal. (The normal status means that the memory
card battery is not dead, the memory card is not electrically destroyed, and
the memory card is correctly inserted into the card slot.)
F
FLASH MEMORY NO SPACE.
HIT <ENTER>
There is not enough space for reading the selected file into the flash memory.
Delete unnecessary files from the flash memory.
FORMAT ERROR
HIT <ENTER>
A memory card could not be formatted successfully.
FILE NOT FOUND IN FLASH ROM
HIT <ENTER>
No file is found in the flash memory. If this error occurs after write to the flash
memory, the flash memory may be destroyed. Replace the memory module.
ILLEGAL FORMAT FILE. The selected file cannot be read into the flash memory. The file to be read is
destroyed or header information for the flash memory is destroyed.
I
INCORRECT PASSWORD
HIT <ENTER>
The password is not correct. Enter the correct password.
L
LOADING ERROR
HIT <ENTER>
An error occurred during loading into the flash memory. Do not touch the
memory card during loading.
MAX EXTENSION OVER
HIT <ENTER>
The extension of a file name is greater than 31. Delete unnecessary backup
files from the memory card.
MEMORY CARD BATTERY ALARM
HIT <ENTER>
The memory card battery is dead. Replace the memory card battery with a
new one.
MEMORY CARD FULL.
HIT <ENTER>
There is no unused space on the memory card. Delete unnecessary files from
the memory card or replace the memory card with a memory card with unused
space.
MEMORY CARD MOUNT ERROR
HIT <ENTER>
The memory card could not be accessed successfully. Check that the
memory card status is normal. Alternatively, the memory card is not formatted
correctly. Format the memory card.
M
MEMORY CARD NOT EXIST.
HIT <ENTER>
No memory card is inserted into the slot. Alternatively, the memory card may
not be inserted all the way.
MEMORY CARD PROTECTED. Although execution of write to the memory card is selected, the write disable
switch is on. Place the write disable switch to the off position.
MEMORY CARD RESET ERROR
HIT <ENTER>
The memory card could not be accessed successfully. Check that the
memory card status is normal.
MEMORY CARD WRITE ERROR
HIT <ENTER>
A file could not be written onto the memory card successfully.
Check that the memory card status is normal.
PROTECT FILE An attempt was made to delete system data, but no system data can be
deleted.
G.7
ERROR CODES AND
ALARM MESSAGES
D Boot system error
messages and actions to
be taken

Leave a Reply

Your email address will not be published. Required fields are marked *