Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
I. MAINTENANCE WITH DISPLAY
LINK TYPED TOUCH PANEL
APPENDIX
647
In this manual, the operation of the LCD with touch panel of FANUC
Power Mate i is described. The environment to create the application
screen is shown in Fig. I.1 (a). The system configuration to make use of
the touch screen is shown in Fig I.1 (b). The feature of the touch screen
is follows.
D Each customer can create the unique application screen on the
touch screen easily with FAPT PICTURE Windows
(A08B9010J512#ZZ07) that is the tool software on PC.
D This touch screen can switch from the application screen to the CNC
screen, such as setting screen for various data, program editing screen
or ladder screen, together with the virtual MDI key. So a display unit
or a keyboard other than this touch screen is not necessary for
maintenance purpose. (If necessary, it is possible to use the MDI
keyboard.)
D This LCD with touch panel can be shared among up to 16 Power Mate
iD/Hs. By selecting switch on the touch screen, the following screen
can display.
1) Application screen for each CNC
2) CNC maintenance operation screen
3) PMC maintenance operation screen
Install customers
application program into
CNC with memory card
(conformed to PCMCIA
PC Card standard
Release2.1)
Create application screen
with FAPT Picture for
Windows on PC
CNC
Maintenance
operation
screen
LCD with touch panel
S Application data input screen
S CNC initialize screen
S CNC maintenance screen
S PMC maintenance screen
S Application screen in normal
operation
Fig. I.1 (a) Environment to create application screen
I.1
OUTLINE

Leave a Reply

Your email address will not be published. Required fields are marked *