Fanuc Power Mate i-D/H Maintenance Manual

I. MAINTENANCE WITH DISPLAY
LINK TYPED TOUCH PANEL
B63175EN/03
APPENDIX
648
Each application screen for
each CNC can be displayed
alternately.
System
maintenance
screen
Maintenance operation
screen for CNC/PMC
also can be displayed.
Virtual MDI keyboard is
available.
Up to 16 CNCs
FS16i
Device select switch
Power Mate i
If required, separate type
MDI can be connected.
A02B0236C120#MBR
A02B0236C120#MBS
@@@@@@@
Fig. I.1 (b) System outline when using display sharing function
The system with the touch screen can be created by the following way.
(Setting up device number)
D When plural CNCs connect with one LCD with touch panel, the touch
panel connects with the CNC with selected device number. The rotary
switch and 7 segment LED in front of the CNC cabinet set up the
device number of each CNC. As for the detail of this operation, please
refer to the following manual.
D FANUC Power Mate iMODEL D/H Maintenance Manual
(B63175EN)
F. SETTING/MAINTENANCE USING THE 7SEGMENT
LED AND ROTARY SWITCH
D When one touch screen is shared among plural CNCs, please refer to
the following manual about the connecting way.
D FANUC Power Mate iMODEL D/H Connection Manual
(Hardware) (B63173EN)
(Make/register application software)
D With the tool of PC, FAPT PICTURE (Windows), you can make the
application software to realize your own unique screen and touch panel
operation for each CNC. Please refer to FAPT PICTURE (Windows)
OPERATORS MANUAL (B66244JA/01) for detail.

Leave a Reply

Your email address will not be published. Required fields are marked *