Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
I. MAINTENANCE WITH DISPLAY
LINK TYPED TOUCH PANEL
APPENDIX
659
IPL OPERATION
0123456789
+/ *=
()[],. #$%&@?
ABCDEFGH I J KLMNOPQR
STUVWXYZ
<POS><PRG><OFS><RST><HLP><SHF>
<SYS><MSG><GRF><ALT><INS><DEL>
<CST><SET><SPC><EOB><CAN><INP>
+ ––+
<PG ><PG >< >< ><
><
>
<BLK>
+ ––
+
––+ ––+
KEY 1 [ S ]
+ ––+ ––+ ––+
KEY 2 [ ]
+ ––+
***
ME S S AGE
***
<0>
[ SELECT] [ YES ] [ NO ] [ ] [ EXI T ]
Fig. I.3.2 CNC initializing operation screen
1) You can select the data by moving the cursor by touching the arrows
, , , in the middle of screen.
Select the desired character by the cursor and touch [SELELCT].
Then, the message SELECT OK? HIT YES OR NO is displayed.
2) If you touch [YES], the selected character is displayed in KEY 1 as
follows.
Ex.) In case that the character S is selected,
KEY 1 [ S ]
If you touch [NO], the message SELECT KEY AND HIT
[SELECT] KEY is displayed again. And the selected data is
cancelled.
3) In the same way, you select the second character by moving the cursor
and touch [SELELCT].
The message SELECT OK? HIT YES OR NO is displayed.
4) If you touch [YES], the selected character is displayed in KEY 2 as
follows.
Ex.) In case that the character 2 is selected,
KEY 2 [ 2 ]
Then, the message ARE YOU SURE ? HIT YES OR NO is
displayed.
5) If you touch [YES], the CNC initializing operation screen is closed.
Then, the CNC system executes the operation designated by the two
characters.
For instance, the character 7 and 9 or <RST> and <DEL> are
selected, clear all memory operation is executed. As for other
operation, please refer to the Item I.3.2.2.
6) If you want to close the CNC initializing operation screen without any
operation, touch [ EXIT ].
Then, the message EXIT OK? HIT YES OR NO is displayed.
If you touch [YES], the CNC initializing operation screen is closed.
If you touch [NO], the CNC initializing operation screen is not closed.
I.3.2.1
Operation of CNC
initializing

Leave a Reply

Your email address will not be published. Required fields are marked *