Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
I. MAINTENANCE WITH DISPLAY
LINK TYPED TOUCH PANEL
APPENDIX
669
A memory card slot is prepared on the left of the touch screen. You can
use a memory card through this memory card slot and read/write various
kinds of data.
You can input/output the various kinds of data through the memory card
slot on the touch panel when you set the the value 7 to the parameter
No.20 (IO CHANNNEL) and perform the following operations.
1. Read/Punch operation by the softkey on each screen
D Read/punch part program
D Read/punch parameters
D Read/punch tool offset data
D Read/punch custom macro variables
D Read/punch pitch error compensation data
D Read/punch periodical maintenance data
D Read/punch maintenance infomation
D Read/punch operation history data
D Read/punch the parameters of FANUC I/O Link slave (β amplifier)
by Power Mate CNC manager
NOTE
In case that the value 4 is set to the parameter No.20,
reading/punching is performed through the memory card
slot on the cabinet of the Power Mate.
2. Operations on PMC screen
(––– operations after DEVICE = MCARD is set on the screen
which appears when the keys are pushed in order of [SYSTEM]
[PMC]
[I/O])
D Read/punch PMC parameters
D Read/punch ladder program
D The others. (Display the directory of files. Delete a file. Etc.)
NOTE
In case that the value other than 7 is set to the parameter
No.20, reading/punching is performed through the memory
card slot on the cabinet of the Power Mate.
3. Operations on ALL IO screen
D Read/punch part program
D Read/punch parameters
D Read/punch tool offset data
D Read/punch custom macro variables
D Read/punch pitch error compensation data
D The others. (Display the directory of files. Delete a file. Etc.)
I.6
DATA INPUT/OUTPUT
USING A MEMORY
CARD
I.6.1
Outline

Leave a Reply

Your email address will not be published. Required fields are marked *