Fanuc Power Mate i-D/H Maintenance Manual

B63175EN/03
I. MAINTENANCE WITH DISPLAY
LINK TYPED TOUCH PANEL
APPENDIX
671
If any error occurs, the warning message MEMORY CARD ERROR:
nnnn is displayed.
The above nnnn means the error code of a memory card shown in the
following table.
Table I.6.2.1 Error Code table of memory card
Code
Meaning
7 Write protect switch is selected. Turn to write enable.
30 Memory card is not inserted. Insert a memory card.
32 The voltage of battery of SRAM card is low. Change the battery.
50 Communication error with a memory card in the slot on the touch
screen.
102 Vacancy of a memory card is not enough.
105 A memory card is not mounted.
106 A memory card has already been mounted.
110 The specified directory is not found.
111 In the root directory, the numbers of files are too many to add a
directory.
114 The specified file name is not found.
115 The specified file is protected.
117 The file is not opened.
118 The file has already been opened.
119 The file is locked.
122 The specified file name is not correct.
124 The extender of the specified file name is not correct.
129 Not supported function is specified.
130 The device is specified incorrectly.
131 The specified pass name is not correct.
133 Two or more files are opened at a time.
135 The device is not formatted.
140 The attribute of the file is unable to read/write.
I.6.2
Message
I.6.2.1
Error message during
the read/punch
operation by softkey

Leave a Reply

Your email address will not be published. Required fields are marked *