WARNINGS AND NOTES RELATED TO PARAMETERS
1. When machining a workpiece for the first time after modifying a parameter, close the machine
cover. Never use the automatic operation function immediately after such a modification.
Instead, confirm normal machine operation by using functions such as the single block function,
feedrate override function, and machine lock function, or by operating the machine without
mounting a tool and workpiece. If the machine is used before confirming that it operates
normally, the machine may move unpredictably, possibly damaging the machine or workpiece,
and presenting a risk of injury.
2. The parameters are set to their optimal values, so that those parameters usually need not be
modified. When a parameter must be modified for some reason, ensure that you fully understand
the function of that parameter before attempting to modify it. If a parameter is set incorrectly,
the machine may move unpredictably, possibly damaging the machine or workpiece, and
presenting a risk of injury.